Tile Grout

Waterproof Versatile Moisture Resistance Structural Stability Polyurea Tile Grout

Polyurea tile grout is a new overturning product. The product can be better used in the joints of ceramic tile, stone, glass, mosaic tile on the wall or flour indoor & outdoor. It has its own special characteristics: permanent moisture proof, more environmental, curing fast, save labor and never discolor. In addition, it solidifies quickly, construction and clean edge in the same day. More importantly, it can be constructed in wet subbase surface, which greatly solves the problem that cannot construct because of climate and other reasons.

Product Features

The Main Purpose

Instructions For Use

Extremely wide scope of application, for tile-grout filling, water-proofing world and decoration project. With good weather resistance, yellowing resistance and does not pulverize. Adjustable hardness and flexibility, able to be both hard and tough.

With good weather resistance, yellowing resistance and does not pulverize.

Adjustable hardness and flexibility, able to be both hard and tough.

The reaction speed is fast and can be cured under the temperature -20℃.

It can be used outdoors.

Press the glue gun to squeeze out about 30cm glue to avoid uneven mixture.

The interruption time should no more than 15 minutes during the construction process, if it’s over 15 minutes, the glue within mixture tube will become curing and not easy to squeeze. Please replace a new mixture tube if you want to keep using it.

It is not easy to squeeze the glue if the temperature below 15℃. Soak the tile grout into hot water for about 10-20 minutes, the performance will be restored.

The cleaning methods after cured completely: use knife to remove the glue with hot water or after heating by hair dryer.

Send Inquiry

We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.