JF-6060 Super Advanced Acetic Silicone Sealant - High-Quality China Suppliers from Reliable Factory
One-part, acid-curing
Excellent water resistance and mildew resistance
| Unvulcanized paste | ||
|---|---|---|
| Typical general characteristics | Inspection Method | Value |
| Density at 23°C | DIN 1183-1A | 0.98 g/cm³ |
| Consistency | ISO 7390 | non-sag |
| Extrusion rate at 23°C | DIN 51757 | 350 ml/min |
| Skin forming time at 23 °C / 50 % r.h. | internal method | Approx. 5-8 min |
| Vulcanized rubber | ||
| Modulus at 100 % elongation | ISO 8339-A | 0.4 N/mm² |
| Tensile strength | ISO 8339-A | 0.7 N/mm² |
| Elongation at break | ISO 8339-A | 260 % |
| Hardness Shore A | ISO 868 | 22 |
Not suitable for use on surfaces that bleed oils, plasticizers, or solvents.
Not suitable for use in enclosed spaces or on surfaces that come into direct contact with food and drinking water.
Not suitable for bonding materials containing copper or copper alloys.
Do not apply when the substrate surface temperature is below 4°C or above 40°C.
What type of curing system does this product use?
This product is a one-part, acid-curing sealant designed for efficient application and reliable performance.
Does the sealant offer water and mildew resistance?
Yes, it features excellent water resistance and mildew resistance, making it suitable for moisture-prone environments.
What is the typical skin forming time for this product?
At 23 °C and 50% relative humidity, the skin forming time is approximately 5 to 8 minutes.
Are there any substrate limitations for application?
Yes, the sealant is not suitable for surfaces that bleed oils, plasticizers, or solvents, nor is it suitable for bonding materials containing copper or copper alloys.
What is the recommended temperature range for application?
Application should not be performed when the substrate surface temperature is below 4°C or above 40°C.
Can this sealant be used in food contact areas?
No, it is not suitable for surfaces that come into direct contact with food or drinking water, nor should it be used in enclosed spaces.